Teac HDR2700T - Remote Control Unit (RCU) Details

User’s Manual
5
1.4 Remote Control Unit (RCU)
Learning keys
1. TV POWER, , TV/AV, SET：
These keys
(except SET key) can be programmed
to learn the
corresponding TV function. After that, you can
control basic TV functions using the unit’s R
CU.
Refer to page 7
Learning Key
for more details
.
The keys of the STB
2. STB POWER: Switch the unit between opera
tion
and standby modes
. In standby mode, the unit will
still record if there is a scheduled recording. Refer
to 2.5 Active Standby and Passive Standby
for
more details.
3. AUDIO: Display audio selection window.
4. MUTE: Mute/restore sound.
5. 0-9: Number keys
are used to enter a channel
number for changing channels or to specify val
ues
for menu options.
6. TEXT (P+): Display teletext information or down
pages.
7. CC (P-): Switch on/off closed caption or up
pages.
8. LAST: Switche
s between the current channel
and the previously viewed channel.
9. INFO: Press once to display current and follow-
ing program. Press twice for detailed informa
tion on
current program.
10/14. CH: Switch to previous or next channel,
or
move cursor
up/dow
n.
11/12. VOL: Decrease or increase the volume
,
change values for menu options
or move cursor
left/right
.
13. OK: Display channel list (See 3.4 Chan
nel
List
),
or confirm operation
.
15. MENU: Display main menu.
16. EXIT: Back to previous menu or exit from op-
eration
.
17. EPG: Display Electronic Program Guide (EPG).
18. FAV: Display favorite channel list.
20. ASPECT: Display AV setting window