TEC EM1-31064 - Page 29

11-3
11. PROGRAMMING PROCEDURES
EM1-31064
How to enter characters
How to enter characters
Use the following procedure to enter a commodity name, address and ingredient message.
Example) 1st line: TEC STORE
2nd line (TEL) 0123-45-6789
SHIFT
T
TEE 6789
EC
SPACE
1st line content
2nd line content
STOR
RETURN
1/4
SHIFT (
DELETE
(A) 1/2
L
E
NOTES: 1. ← and → keys are the cursor keys.
2. To insert a space, move the cursor to the next character to the space to be inserted,
and press INSERT key.
3. To delete a line, press
DELETE (B) key.
4. To move the cursor to the preceding line when entering a commodity name, press -
key, or
↑ key.
5. Pressing the
key toggles between capitals and small letters.
6. When entering a commodity name, press
ENTER or ↓ key instead of the
RETURN 1/4 key to return.
7. Pressing the
CHANGE PLU key toggles the type font between normal and boldface.
8. To call a preset ingredient message idiom, follow the procedure below:
9. To skip a line when entering an ingredient message, follow the procedure below:
NEXT
PLU
RETURN
1/4
Enter the idiom #.
SET
NEXT
RETURN
1/4
Enter the line #.