Technaxx TX-67 User Manual

15
Figure 3-6
Fix Screw of LED Decoration Cover
Reset Switch
Micro SD Karte slot
Note:
 Long press the “Reset button” shown in Figure 3-6 for 10 seconds when the device is
power on if the device needs to restore to factory setting.
 If the device needs to use WPS function, short press the “Reset button” shown in Figure
3-6 for 1~2 seconds when the device is power on, press the WPS button of the router,
generally the device can connect to corresponding router within 1 minute (only
supported by some models).
 Some models do not have vertical rotating ring component, which does not support
image rotation, refer to the actual product.
 There are some differences about IR light layout for some models, refer to the actual
products.
Step 4: Take up the dome enclosure, put it back on the camera properly regarding to screw
and hole, and fasten the three inner hex screws with wrench. So far the installation is
completed.

Technaxx TX-67 Specifications

General

Brand	Technaxx
Model	TX-67
Category	Security Camera
Language	English