Technaxx TX-67 User Manual

71
11.7.11 Alarm out Control (not TX-65, 66, 67)
System supports to enable or disable device alarm output.
1. Under live preview, select a monitoring channel, click on
button. Open corresponding alarm output of channel,
see Fehler! Verweisquelle konnte nicht gefunden
werden.figure 11-27.
2. Click on enable button to enable or disable a certain alarm
output.
Figure 11-27
11.7.12 Audio (optional)
In live preview , click on the symbol will change to now you can listen to the oponent
on the otherside of the selected channel. By pressing on the symbol again the channel will
be muted.
11.7.12 Light Control (optional)
System supports to enable or disable device compensation light.
1. Under live preview, select a monitoring channel, click on button, open
corresponding light panel of the channel.
2. Click on on/off button to turn on/off compensation light.
3. Click on or to adjust light.
11.7.13 Image Adjustment
System supports image adjustment including brightness, contrast, saturation and etc.
1. In live preview, select a monitoring window, click on button, open image adjustment
control panel.
Icon
Note
Adjust brightness
Adjust contrast
Adjust hue
Adjust saturation
Reset
2. Click on functional icon to adjust corresponding effect. increase/decrease parameter by
clicking on +/- buttons in monitoring window.

Technaxx TX-67 Specifications

General

Brand	Technaxx
Model	TX-67
Category	Security Camera
Language	English