Technics RS-DC10

PNa¥-\relom(alolUl@int-vove)ce| [elem Dl @1@mm -lel-1-))
AUTO
REC LEVEL
7 PLAY+
Select the track
number writing
mode.
This button selects
automatic or manual track
number writing.
(See page 32.)
Start playing the
source which is to
be recorded, and
adjust the recording
level.
(See next page.)
Return the played
source to its
original state.
Start recording and
start playing the
source which is to
be recorded.
The recording and play
Indicators light.
Temporarily stopping a recording
PAUSE
MODE:
|
|
(REC PAUSE)
The recording indicator
lights and the play
indicator flashes.
Press the play button to
resume recording.
A track number is added
at the position where the
recording was
commenced.
Stopping a recording
STOP
MODE-
The recording and play
indicators go off.
The “use again” marker
denoting where the
recording is to be followed
on is written at the position
where the recording is
stopped. (See page 42.)