Technics RS-DC10

Various Recording Methods
(DIO. Om F-lel-1-))
Creating the unrecorded blanks
Tecniies nica. compsct cassevte peck 95.000 SS
Creating an unrecorded blank where the recording is to
commence
When recording from a point midway through a tape,
the blank will clearly identify where the previous 2 AUTO REC MUTE Create an
recording ends and the new recording begins. 8 unrecorded blank
lasting
about.
-
1
In
the
stop
mode:
3
seconds.
woe
REC? Set the deck to the MODE.
.
recording
standby
:
mode.
if
om
|
After the indicator lights
for about 3 seconds, the
deck is set to the
recording standby mode.
The track number is not added when the unrecorded blank
is written.
Creating unrecorded blanks during recording
This is useful when eliminating unwanted sections or Re-recording : .
noise. PLAY+ The track number is
added at the start of the
: fo track the recarding of
During recording: which is to be commenced.
Create an
AUTO REC MUTE unrecorded blank Reference:
1 9° lasting about When a new recording is made on a recorded tape, the
3 seconds. previous recording is automatically erased.
After the unrecorded blank
has been created, the
deck is set to the
recording standby mode.
| oa
_ et