Technics RS-DC10

Marker Editing while Recording is in Progress
Writing the next marker
Writing the marker on side A
Displays during next marker editing
(When it has been written on side A}
1 While recording is in progress: .
cae
Set
the
deck
to
the
(1)
Writing
of
next
fone
recording
standby
market
J
:
7
ad
mode.
r|
(2) Fast forwarding “
——— a it = —— move--—~-
2 ott Write the next to beginning of
—e marker. side B
After the next marker has
been written, the tape is
fast forwarded to the (3) Writing of lead-in
beginning of side B and
the recording standby
mode is established.
(See figure on right.)
3 Record the next (4) Beginning of tape
PLAY*
track on side B.
The first track on side B is
written as track 1, and the
absolute time is written
starting from 0:00. (5) Recording standby [-track- _ —nmescounten—__ —— wone——
mode H
i (REC PAUSE)
Writing the marker from any point on
side B
Performs steps 1 and 2 described above.
After the next marker has been written, the tape is
fast forwarded to the beginning of side A and then it
stops.