Technics SC-CH730 - Setting the Record Timer

Setting the record timer
Make sure that you have completed “Setting the Time” on page 12.
Select this timer when you want to use the timer to record a midnight
program or while you are out. The system will record a desired radio
broadcast at a desired time.
The following example in the figure shows how to set the record timer
for; recording preset channel no.'1 on Saturday from 18:30 to 20:00.
Switch on the power.
@ Press TIMER/CLOCK to se-
lect “[j REC”.
Q “[] REC’ indicator lights.
“REC”
Cae) Within 8 seconds:
@ Press SET.
@ Press TUNING/TIMER v or
A to select the day.
Refer to “About the variation of the
day setting” on page 37.
Cong) @ Press SET.
3
®
suninc/
TMER
(“ON”
time
setting)
@ Press TUNING/TIMER v or
A to select the hour.
: @ Press SET.
TUNING/TIMeER () Press TUNING/TIMER v or
A to select the minutes.
(“OFF” time setting)
@ Press TUNING/TIMER v or
a to select the hour.
: @ Press SET.
tuninc/tiMeR (@)Press TUNING/TIMER v or
A to select the minutes.
Crd @ Press SET.