EasyManuals Logo

TechniSat DigiCorder HD series User Manual

TechniSat DigiCorder HD series
352 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #13 background imageLoading...
Page #13 background image
13
ENEN
broadcast at the same time. While the recording starts in the back-
ground, a still picture appears on the screen.
>
To continue the playback of this broadcast from this point, press the yel-
low function key Play/Pause again. You will now view the broadcast with
a time delay relative to the live transmission (Timeshift), while the current
broadcast is continually recorded in the background.
Manually end recording
> First press the OK button to end the recording.
> Press the green function key to access the PVR navigator.
> Use the arrow keys up/down to highlight the current recording and con-
rm by pressing OK.
> Press the green function key Stop and a selection window appears.
> Use the arrow keys up/down to select Save, to save the recording onto
the hard disk, or Cancel, to cancel saving of the broadcast and con rm
by pressing OK.
Automatically end recording
Option 1
> Press the On/Standby key. Now a selection window appears, which
should show the details of the current recording.
> Use the arrow keys up/down to highlight the line with the desired action.
> Con rm by pressing OK. The receiver completes recording of the broad-
cast and subsequently reverts to standby mode.
> When you switch on the receiver before recording is over, a selection
window appears, select whether you wish to view the current broadcast
from the start, revert to live mode or switch to the current channel.
> Use the arrow keys up/down to highlight the desired line and con rm
by pressing OK. When Start is selected, the recording will continue in
Timeshift operation.
Option 2
> By pressing the Record button, a selection window appears.
> Use the arrow keys up/down to highlight the line with the desired action,
e.g. +1 hour, and con rm by pressing OK. The receiver will now record
the channel(s) being broadcast on the channel selected for the time
period selected, and will then automatically stop recording.
Timer recordings
With the help of the hard disk timer, you can record broadcasts on the inte-
grated hard disk even when you are away. Your receiver is also equipped with

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the TechniSat DigiCorder HD series and is the answer not in the manual?

TechniSat DigiCorder HD series Specifications

General IconGeneral
BrandTechniSat
ModelDigiCorder HD series
CategoryReceiver
LanguageEnglish

Related product manuals