4
1. Illustrations and directives concerning use:
The operation of the digital receiver is simplied by
the use of the “On Screen Displays”, which also
serves to reduce the number of keys
required on the remote control unit.
All functions are displayed on the
screen, and can be operated with a few
keys. Related functions are combined
in a “MENU”. The function selected is
highlighted in colour. The “function
keys” red, yellow, green and blue are
indicated by colour bars in the bottom
line. These colour bars represent different functions in
the various menus, which will be activated by pressing
the appropriate coloured key (multifunction key) on the
remote control. The “Function keys” are only active when
a brief description is displayed in the appropriate eld.
Remote control option:
By switching the remote control option, this remote control unit can be used to control two TechniSat receivers and one
TechniSat television set with the same coding.
> To switch the remote control option, press the desired key (SAT1, SAT2 or TV) and OK.
Arrow keys
LED Display
On/standby
USB socket
Smartcard reader
OK button
Slide the CONAX Smartcard (golden chip facing down
and positioned in direction of insertion) until it is firmly
inserted in the card reader
On/Standby
OK
INFO
Arrow keys right
Volume +
Channel list/On/Off
Volume +/-
Stop/Freeze frame
Mute
Option button
Channel +/-
Arrow keys left
Volume -
Arrow keys Up
Channel +
Channel -
Arrow keys Down
TV program
(EPG)
Numeric keys
Video text
on/mix/of
Zoom
Picture in Picture
HDMI
Menu On/Off
Multifunctional keys
Sleep timer
Recording
Playback function
Back
To Next Page
Loading...
Need help?
General
