15
Please note, for large les and short interval times, it may be impossible to display all of
the images in the time allowed. If the specied image changeover time is too short for the
images, the picture is displayed after it has nished being read.
7.2.3. Exiting Slide show:
To end the slideshow, press the Stop key.
> To activate the navigator or to revert back to normal operation, press the TV/Radio key.
7.3. Film playback in MPG format:
With your receiver, you can display data, which is saved in MPG format on a device connected
via the USB socket. The USB device should be formatted using the le system FAT 32.
> By pressing the blue function key Functions, the NAV menu opens.
> Use the arrow keys up/down to highlight the line Films and conrm by pressing OK.
> Use the arrow keys up/down to select the source from which you wish to view the Film
les, and conrm by pressing OK. A list showing the lm les available on the USB device
or the inserted cards will be displayed.
> Use the arrow keys up/down as applicable to initially highlight the folder, which contains
the desired lm le and conrm by pressing OK.
> Use the arrow keys up/down to select from the list of MPG les, which you wish to view
and conrm with OK.
7.3.1. Pause/Still picture:
> To pause the playback of a recording (still picture), during playback, press the Pause /
Play key or the Still picture button. The symbol „Pause >II“ will be displayed.
> Press the relevant key again to restart the playback from the same position.
7.3.2. Fast Forward:
To access a specic portion of a lm, your device includes variable speed Fast Forward and
Rewind functions.
> During playback, press the Fast Forward or Rewind key. The display indicates “Fast Forward
>>” or “Rewind <<”. The recording will now be run at 4 normal speed in the desired direction.
> Press the Fast Forward or Rewind key again and the speed increases to 16 . The display
indicates “Fast Forward >>” or “Rewind <<”.
> Press the Fast Forward or Rewind key again and the speed increases to 64 . The display
indicates “Fast Forward >>” or “Rewind <<”.
> Once the desired portion of the recording has been reached, you can access normal
playback by pressing the Pause / Play key.
EN
To Next Page
Loading...
Need help?
General
