12
6.3 Manual programming of timer:
Use the Menu key to call up the Main menu.
> Use the arrow keys up/down to mark the line Manage timer.
> Conrm by pressing OK.
The sub-menu Manage Timer will be displayed.
> Use the arrow keys up/down to select the desired Timer type.
> Press the OK key to go to the entry window used for programming a new Timer event.
6.3.1. TV list:
Now use the arrow keys to mark the desired program.
> Use the arrow keys up/down to move around the list one line at a time.
> Use the arrow keys left/right to move backward or forward in the list one page at a time.
> Press the OK key to accept this into the timer.
6.3.2. Date:
> Use the arrow keys to mark the column Date.
> Use the numeric keys to enter the date (4-digit format) of the Timer event.
6.3.3. Start:
Use the arrow keys to mark the column Start.
> In this line, use the numeric keys to enter the starting time for the timer.
6.3.4. Stop:
Repeat the steps as described under “Start” to enter the stopping time (except for channel-
switching timer).
6.3.5. Repeating:
Use the arrow keys to mark the column Rep.
> Press the OK key.
A selection window will be displayed, showing various repeat options.
1x Timer on once
T Daily repeat
1 W Repeat once a week
1-5 Repeat only on weekdays
44 8
6-7 Repeat only on weekdays
> Use the arrow keys up/down to select the desired function.
> Conrm and accept the setting by pressing OK.
To Next Page
Loading...
