16
7.3.3. Zoom:
Press the Zoom key rst. A zoom selection screen then appears.
> By pressing the Zoom or Arrow keys right/left repeatedly, the various zoom factors can
be adjusted.
> Exit zoom selection by pressing the Back button.
7.3.4. End playback:
> To exit playback, press the Stop key.
7.4. Recording
7.4.1. Preparing USB device for recording:
> Use the Menu key to call up the Main menu
> Use the arrow keys up/down to mark the line Recording Media Organizer and conrm by OK
> It is necessary to put external USB drive into USB 2.0 Card Reader, afterwards choice
format with PVR les system option In this way prepared USB drive, you can in any time
start recording
7.4.2. Recording on external USB device:
You can start recording in three ways
1. Instant recording
Use this type of recording to record a currently running program immediately, with just
one press of the key.
2. Timer-controlled recording
In the case of this function, your digital receiver will be switched on and off for the
recording, so this can be recorded in your absence. The timer can be programmed either
manually or automatically using the EPG function.
3. Timeshift recording
The timeshift recording mode makes it possible to provide timeshift television viewing. While
the program is still being broadcast, you can already view the recording, shifted in time.
7.4.3. Instant recording
Starting a recording manually
Option 1
> Switch on the channel on which the program is being broadcast that you wish to record.
> Press the Record key to record the program currently being broadcast. The program will
continue to be displayed on screen while the recording is in progress.
> To interrupt the display of the current program at a specic spot, press the yellow
function key Play/Pause. While the recording continues in the background, a still image
(freeze frame) will be displayed on screen.
To Next Page
Loading...
Need help?
General
