18
7.4.5. Timeshifted recording:
The time-shift function provides the facility of recording and playing back at the same time.
This is made possible by Time-Shift technology. Thus you can already view the beginning
of the recording, and can decide to skip over certain passages already recorded (e.g. advert
breaks). The live signal of the broadcast will continue being recorded at the same time.
Attention: I you want to get an access to recordings saved on external USB device in normal
operation, please press the green key function to cause PVR Navigator. If you are in Radio or TV
mode, on the screen will be shown Radio or TV recordings.
8. Parental control:
Your receiver is equipped with a parental control function. This means that important
functions (e.g. calling up the main menu) can be protected from unauthorized use. In
addition, recordings and channels that you have blocked can only be accessed by entering
a four-digit PIN code.
8.1. Parental control settings:
> Use the Menu key to call up the Main menu.
> Use the arrow keys up/down to mark the line Settings.
> Conrm by pressing OK.
> Use the arrow keys up/down to mark the line Parental control.
> Conrm by pressing OK.
8.2. PIN query mode:
> In this line, use the arrow keys left/right to set the pin query mode of the parental control
function to On or Off.
> If you set the pin query mode to On, and have not yet changed the factory PIN, you will
be requested to change the PIN.
8.3. Changing the PIN:
The unit PIN code is set to 0000 at the factory.
> Press the OK key.
The menu for changing the unit PIN code will be displayed.
> Now use the numeric keys to enter the current unit PIN code in the line Unit PIN (factory
setting 0000).
> In the line Enter new PIN use the numeric keys to enter the desired new unit PIN code.
> Repeat the entry in the line Repeat new PIN.
> When you have completed changing the PIN code in this manner, you will be taken back
automatically to the menu Parental control.
To Next Page
Loading...
Need help?
General
