To Next PageTo Next PageHow do I fix a TechniSat DIGIT ISIO STC when a USB device is not recognized?
If your TechniSat TV Receiver's USB device is not recognized, it may be because the USB device is formatted for the wrong file system. Format the USB device for FAT32 file format.
What to do if my TechniSat DIGIT ISIO STC has no picture, no sound display on?
If your TechniSat TV Receiver displays no picture and no sound, it might be due to several reasons: * A short circuit in the LNB connection. To resolve this, switch off the receiver, fix the short circuit, and then switch the receiver back on. * A faulty or missing cable connection. Check all cable connections. * A defective LNB. Consider replacing the LNB. * An incorrect external unit installed at the receiver. Correct the setting. * Antenna incorrectly adjusted. Adjust the antenna.
How to troubleshoot TechniSat TV Receiver when PC cannot connect to receiver; receiver cannot connect to network?
If your PC cannot connect to the TechniSat TV Receiver, or the receiver cannot connect to the network, this could be due to: * Wrong network settings. Check the network settings. * Network cable connected incorrectly. Check the network connection.
What to do if TechniSat DIGIT ISIO STC TV Receiver has no sound or wrong audio playing?
If your TechniSat TV Receiver has no sound or is playing the wrong audio, it could be due to Dolby Digital being active or the wrong audio language being selected. Check the settings in the menu.
Why are various channels not shown in the channel list on my TechniSat DIGIT ISIO STC?
If your TechniSat TV Receiver is not displaying certain channels in the channel list, it could be due to a wrong channel list being selected. Select a different channel list.
Why does my TechniSat DIGIT ISIO STC TV Receiver switch off independently?
If your TechniSat TV Receiver switches off independently after a certain period of time, the Auto Standby function may be switched on. Check the Auto Standby setting and disable it if necessary.
Why is there no sound via HDMI on my TechniSat TV Receiver, but the picture is OK?
If your TechniSat TV Receiver has no sound via HDMI but the picture is OK, it might be because the wrong HDMI sound format is selected. Check the HDMI sound format settings.
How to fix TechniSat DIGIT ISIO STC TV Receiver when there is sound but no TV picture via HDMI?
If your TechniSat TV Receiver has sound but no picture via HDMI, the configured HDMI resolution may not be supported by your TV. Correct the HDMI resolution.
What to do if my TechniSat DIGIT ISIO STC TV Receiver cannot receive channels that were previously being received?
If your TechniSat TV Receiver cannot receive channels that were previously being received, it could be due to: * A defective or incorrectly adjusted antenna. Check the antenna. * The channel being transferred to a different transponder. Run a channel search.
How to fix a TechniSat DIGIT ISIO STC remote control that is not working?
If your TechniSat TV Receiver remote control isn't working, it could be due to: * Using the wrong remote control code. Set the correct remote control code. * The batteries are dead. Replace the batteries.
General| Type | Set-top box |
|---|---|
| HDTV | Yes |
| 3D TV | No |
| Smart TV | Yes |
| WLAN | Yes |
| EPG | Yes |
| Scart Output | Yes |
| CI Slot | 1 |
| Power Consumption | 10 W |
| Tuner Type | DVB-S2 |
| Connectivity | HDMI, Ethernet, USB |
| Storage | USB |
| Operating System | Linux |
| Hard Drive | No |
| Common Interface | CI+ |
| Video Formats | MPEG-2, H.264, H.265 |
| Audio Formats | MP3, AAC |
Important safety precautions for using the receiver.
Procedure for safely connecting the receiver to the mains power outlet.
Connecting various external units like antennas and network devices.
How to connect the digital receiver to a television using an HDMI cable.
Procedure to power on the digital receiver from standby mode.
Guide to accessing and navigating the receiver's main menu and submenus.
Methods for modifying various settings within the receiver's menus.
Setting operating language, country, screen format, and reception signals.
Configuring DVB-S and DVB-T antenna settings for optimal reception.
Establishing network connection and performing channel searches.
Updating receiver software, ISIO lists, and regional programmes.
Turning the unit on/off and selecting channels using various methods.
Receiving encrypted content and adjusting audio volume, including mute.
Recording the current programme immediately at the push of a button.
Scheduling recordings to occur when the receiver is unattended.
Enabling live viewing of a programme while it is still being recorded.
Accessing recorded content via the DVR Navigator and starting playback.
Configuring settings for smartcards and CI/CI+ modules for encrypted content.
Step-by-step guide on how to initiate and process a warranty claim.
Initial steps for making a warranty claim, involving contacting the retailer or service hotline.
Specific instructions for warranty claims on devices purchased from the TechniShop.
Procedure for sending the device to the TechniSat Service Centre as advised by the hotline.
