TechniSat DIGITRADIO 371 CD IR User Manual

63
DE
EN
FR
NL
7 DAB+ (digital radio) function
7.1 What is DAB+?
DAB+ is a digital format through which crystal clear sound with no noise can be
heard. In contrast to conventional analogue radio stations, DAB+ can be used to
broadcast multiple stations on the same frequency. For further information go to
www.dabplus.de or www.dabplus.ch.
7.2 DAB+ (digital radio) reception
> Press the MODE buon until [DAB] is shown on the display.
If DAB+ is being started for the first time, a complete scan will be performed.
Aer the scan is complete, the first station is played back in alphanumeric
order.
7.2.1 Performing a complete scan
The automatic scan (Complete scan) scans all DAB+ band III channels and
thereby finds all stations being broadcast within the reception area.
Aer the scan is complete, the first station is played back in alphanumeric
order.
> In order to perform a complete scan, press the SCAN buon (20) on the
remote control.
Alternatively:
> Open MENU > [Complete Scan] and press the ENTER buon.
> [Scanning...] appears on the display.
During the scan a progress bar and the number of stations found is displayed.
If no station is detected, check the telescopic antenna and, if required, change
the installation location (Section 4.3.1).
7.2.2 Selecting stations
> By pressing the / buons, the station list can be called up and you can
switch between the available stations. Press the ENTER buon to play the
station.
Alternatively:
> Open MENU > [Station List] and press the ENTER buon.

TechniSat DIGITRADIO 371 CD IR Specifications

General

Brand	TechniSat
Model	DIGITRADIO 371 CD IR
Category	Radio
Language	English