TechniSat DIGITRADIO 371 CD IR User Manual

67
DE
EN
FR
NL
With the [NO] seing, the scan stops automatically upon detecting
each available station. This can result in weak stations being played with
background noise.
> Press the ENTER buon to save.
8.6 Audio seings
> Press the MENU buon and select the > [Audio Seing] item.
> Use / to select the [Mono Only] > [NO] item to play the sound in stereo,
or [Mono Only] > [YES] (if the FM signal is weak).
> Confirm the seing by pressing the ENTER buon.
8.7 Saving FM stations to a memory slot
The station memory can save up to 20 stations in the FM range.
> First set the desired station frequency (Section 8.3, 8.4)
> In order to store this station in a memory slot, hold down the PRESET buon
while playing until [Save Channel] appears in the display. Then use the /
buons to select a favourites memory slot (1 - 20). Press the ENTER buon to
save.
> Repeat this process to save additional stations.
You can also save stations to one of the One-Touch buons (1 - 10) by
holding down the corresponding buon a lile longer.
8.8 Retrieving FM stations from a memory slot
> To retrieve a station that you have stored in the FAV memory slots, briefly
press the PRESET buon and select a station slot (1 - 20) using the /
buons. Press the ENTER buon to play the station.
If no station is saved in the selected station slot, [(empty)] appears on the
display.
Alternatively, the corresponding One-touch buon (1 - 10) on the remote
control can be used.

TechniSat DIGITRADIO 371 CD IR Specifications

General

Brand	TechniSat
Model	DIGITRADIO 371 CD IR
Category	Radio
Language	English