TechniSat DIGITRADIO 371 CD IR User Manual

77
DE
EN
FR
NL
> Here you can select from O (alarm is switched o), Daily (every day of the
week), Once, Weekdays (Mon - Fri) or Weekends (Sat and Sun). Press ENTER
to apply the seing.
Time
> Here you can enter the alarm time and date (if required).
First use the / buons to select the hours and press the ENTER buon to
accept this. Then input the minutes. Again, accept this by pressing the ENTER
buon.
If Repeat> [Once] has been selected, you must also enter the date as well as
the time.
Mode
> You then enter the source. BUZZER, Internet radio, DAB, FM, CD or USB are
available. Press the ENTER buon to accept the seing.
Station
If you have selected Internet radio, DAB or FM, you can then enter whether or
not you want to be woken up by the last station listened to or by one from
your Favourites list (if favourites have been saved). Press the ENTER buon to
accept the seing.
Volume
> You can then set the alarm volume using the / buons. Press the ENTER
buon to confirm.
Save
Press the ENTER buon to save the alarm.
The time must be read for the alarm to function properly. For more details, see
Section 16.4.2.
When an alarm is active, an alarm symbol appears on the display.
15.2.2 Switching o the alarm aer being woken up
> Press the On/Standby buon on the remote control or on the device to
switch o the alarm.

TechniSat DIGITRADIO 371 CD IR Specifications

General

Brand	TechniSat
Model	DIGITRADIO 371 CD IR
Category	Radio
Language	English