TechniSat DIGITRADIO 371 CD IR User Manual

76
The playback is controlled on the external device.
Do not set the volume too low to prevent interference.
During AUX input operation, the device remains switched on, even if the
connected audio source is not providing any sound.
The USB port on the DIGITRADIO 370/371 CD IR can also be used to charge or
power external devices. The maximum charging current is DC 5 V, 1 A.
15 Other functions
15.1 Sleep timer
The sleep timer automatically switches the DIGITRADIO 370/371 CD IR to standby
aer the set time.
> Press the MENU buon and use the / buons to select the [Main Menu]
>[Sleep] item.
> Press the ENTER buon.
> Use / to select a period aer which the DIGITRADIO 370/371 CD IR should
switch o. You can choose between O, 15, 30, 45 and 60 minutes.
> Press ENTER to apply the seing.
Alternatively the SLEEP buon (18) can be used. Press it repeatedly to
scroll through the times.
When the sleep timer is active, a moon symbol appears on the display
showing the time still available.
15.2 Alarm
The alarm switches on the DIGITRADIO 370/371 CD IR at the set alarm time. 2 alarm
times can be programmed. The description of how to programme Alarm 1 serves as
an example.
15.2.1 Seing the alarm
> Press the Alarm 1/2 buon (17) on the remote control.
Alternatively:
> Press the MENU buon and use the / buons to select the [Main Menu]
>[Alarm] item. Then press the ENTER buon.
> Use / to select the alarm you want to set and press the ENTER
buon.
> The specific alarm parameters can then be set.
Repeat

TechniSat DIGITRADIO 371 CD IR Specifications

General

Brand	TechniSat
Model	DIGITRADIO 371 CD IR
Category	Radio
Language	English