TechniSat DIGITRADIO 371 CD IR User Manual

73
DE
EN
FR
NL
12.5 Quick search
While the track is playing, you can perform a quick search forwards or backwards to
find a specific section.
> Hold down the Previous Track or Next Track buons to quickly skip
forwards or backwards within a track for as long as the buon is held down.
12.6 Repeat function
You can select whether a track, the entire folder/album (only for MP3 CDs) or all of
the tracks on the CD are to be repeated.
> Press the Repeat buon multiple times.
The selected mode appears on the display (Repeat Track, Repeat Album,
Repeat All).
> To switch the function o again, press the Repeat buon again until the
repeat icon on the display disappears.
12.7 Random playback
With the random generator, the CD tracks can be played back in random order.
> If you press the SHUFFLE buon while playing, the shue icon appears
on the display
> To switch the function o again, press the SHUFFLE buon again.
12.8 Programming function
With the programming function, you can play up to 20 tracks on a music CD or an
MP3 CD in an order determined by you.
You can only undertake the programming if there is a disc inserted and the
device is in stop mode.
> Press the PRESET buon on your remote control.
> The track number (T) now flashes in the display. [P01] appears to the le of
this. P01 is the first programming slot. Any tracks you want can then be set up
in sequence in the programming slots. With MP3 CDs you can select the folder
using F+ and F-.
> Use the Previous track or Next track to select the first track to be
programmed.
> Press the ENTER buon to accept the track.
> The second programming slot (P02) is then active. Proceed as described
above to save a track to programming slot 2. Do this to save the tracks you
want to all the programming slots.
> Press the Play/Pause buon to play the programmed tracks.

TechniSat DIGITRADIO 371 CD IR Specifications

General

Brand	TechniSat
Model	DIGITRADIO 371 CD IR
Category	Radio
Language	English