TechniSat DIGITRADIO UP 55

93
DE
EN
FR
NL
10.4 Manual station scan
> Briefly tap on << or >> repeatedly to set the desired station or frequency.
The display shows the frequency in steps of 0.05 MHz.
10.5 Scan seing
In this menu item it is possible to set the sensitivity of the scan.
> Open the main menu. Use the << or >> touch fields to select the [Scan Seings]
menu item, then tap on OK/NAV.
> Use << or >> to select whether the scan should only stop for stations with a
strong signal [Strong Stations Only] or for all stations (including stations with a
weak signal) [All Stations].
With the All Stations seing, the scan stops automatically upon detecting each
available station. This can result in weak stations being played with background
noise.