TechniSat STERNRADIO IR 2 - Connecting the Power Supply Unit

24
6.3.2 Connecting the power supply unit
Make sure that the operating voltage of the power supply unit matches the
local mains voltage before plugging it into the wall socket.
WARNING!
Do not touch the mains plug with wet hands, risk of electric shock!
ATTENTION!
Lay the mains cable so that nobody can trip over it.
> Insert the plug of the supplied mains adapter into the socket labelled DC-IN
on the back of the STERNRADIO IR 2. Then connect the mains adapter to the
mains.
The battery is charged as soon as the device is connected to the mains.