TechniSat STERNRADIO IR 2 - Manual Configuration

39
> The connection is now established automatically.
12.3.2 Manual configuration
Under Manual configuration, you must enter the reception data of your network router
manually.
> Select [Manual configuration] and press the scroll wheel.
> Select [Wireless network] and press the scroll wheel.
> Here you can now specify whether the DHCP server of the router should be
used. Otherwise, you must then enter the IP address digit by digit
manually.
> Under [Enter SSID], you must enter the network name of your WLAN network.
The first digit is highlighted. Now turn the scroll wheel
until the first digit or letter of the SSID is displayed. Press the ▶ button to
accept the digit or letter and skip to the next entry. Now proceed as described
above until the complete SSID has been entered. Press the
Connect the scroll wheel.