12.12
WeUr
WeGer information can be shown in standby mode in the display for your
configured location, provided the connection to the Internet is active in
standby mode.
was switched on (Settings > Network > Check network when switching on
>
Activate).
>
To configure the weGer location, select [Setting > WeUer]
and press the scroll wheel.
>
Select [Local setting] and then the current location of the device or select
any location.
>
Select [Temperature unit] to choose between degrees Celsius and
Fahrenheit.
>
Under [Display on standby], you can activate or deactivate
the weGer display in standby mode.
To Next Page
Loading...
