TechniSat STERNRADIO IR 2 - Eliminate Errors

54
14 Eliminate errors
If the device does not work as intended, check it using the following table.
Symptom
Possible cause/remedy
Device cannot be switched on.
The device is not supplied with power. Connect
the power supply unit correctly to the socket
and to the device.
No sound can be heard.
Increase the volume.
The display does not switch on.
Disconnect the appliance from the mains and
reapply power.
Device cannot be operated.
Disconnect the appliance from the mains and
reapply power.
No WLAN connection.
Check the configuration of your router.
Check that the WLAN password is correct.
If you a r e still unable to rectify the fault after the checks described, please contact the
technical hotline.