12.7
On/Off
timer
The on/off timer can be used to configure a period of time during which the radio is
active. It switches on automatically and then switches off again.
>
To configure a timer, select [Setting > On/Off timer] and press
the scroll wheel.
>
Select [On] and press the scroll wheel to start the configuration.
>
Select the timer repetition [Daily] or [Once]. You can then specify the days
on which the timer should be active.
Press the ◀ button and then [Time].
>
You can now use the scroll wheel to enter the time (hours : minutes).
First enter the start time, then the stop time. Press the ▶ button after
entering each digit. Press the scroll wheel to save the time.
>
Finally, the transmitter can be selected under [Source]. Use the scroll
wheel to select a station from your favourites list and press the scroll
wheel.
To Next Page
Loading...
