TechniSat STERNRADIO IR 2 - Alarm Clock Volume; Timer

45
12.5.2 Alarm clock volume
> To set the alarm clock volume, select [Settings > Alarm clock > Alarm
clock volume]. Press the scroll wheel.
> Change the volume using the scroll wheel and press the scroll wheel to
apply the setting.
12.6 Timer
The timer is comparable to the function of an egg timer. After a set time, a signal
tone sounds.
> To configure a timer, select [Setting > Timer] and press the scroll
wheel.
> You can now use the ◀ and ▶ buttons to enter the time (minutes,
seconds). The ▶ button increases the value, the ◀ button decreases it.
Press the scroll wheel to start the timer.
> After the set time has elapsed, a signal tone sounds. Press the
Scroll wheel to switch off the acoustic signal.