TechniSat STERNRADIO IR 2 - Display; Sleep Timer

48
12.10 Display
You can have the display shown in colour or monochrome.
> To configure the display, select [Settings > Display] and press the
scroll wheel.
> Use the scroll wheel to select either [Colour] or [Monochrome].
and press the scroll wheel to accept the setting.
12.11 Sleep timer
The sleep timer automatically switches the STERNRADIO IR 2 to standby after the set
time.
> To configure the sleep timer, select [Settings > Sleep timer]
and press the scroll wheel.
> Use the scroll wheel to select either [Off] or one of the available times
and press the scroll wheel to accept the setting.
The time remaining before switching off is shown on the display (BeG symbol).
If you want to switch off an active sleep timer, select [Sleep timer] > [Off].