Functions and buttons to be pressed are shown in feU in these operating
instructions. Display indications in [square brackets].
Some texts (e.g. menu entries, station information) may be too long to be
shown on the display. After a short time, these will then be displayed as a
loud text.
8
Initial setup
When the STERNRADIO IR 2 is switched on for the first time, the
Initial setup wizard.
All settings can also be changed at a later date at any time.
>
Use the scroll wheel to select the operating language and confirm by
pressing the scroll wheel.
>
Please note the data protection information in the next step and press the
scroll wheel to go to the next step.
>
In the next step, you can specify whether the STERNRADIO IR 2 should
remain connected to the Internet even in standby mode. This can be, for
example
be an advantage for app control. However, this increases the
To Next Page
Loading...
