>
To configure an alarm clock, select [Settings > Alarm clock > Alarm
clock 1 or Alarm clock 2].
As an example, the alarm clock is now configured using alarm clock 1:
>
Use the scroll wheel to select [Alarm 1] and press the scroll wheel.
>
Select [ON] to switch the alarm clock on or [OFF] to switch off an alarm
clock that has already been configured. Press the scroll wheel to accept the
setting.
>
Select the alarm repetition [Daily] or [Once]. You can then specify the days
on which the alarm clock should be active.
Press the ◀ button and then [Time].
>
Use the scroll wheel to enter the time when the alarm clock should start.
After entering each digit with the scroll wheel, press the ▶ button and then
press the scroll wheel to confirm.
>
The source is now configured. You can choose between [Sound],
[Melody] or [Internet radio]. With the [ I n t e r n e t radio] option, you can
Then select a channel from your favourites list. Press the scroll wheel to
accept.
>
Alarm clock 1 is now configured and active.
To Next Page
Loading...
