19
1.2.4 Safety devices and labels
A - Fixed guard: guards against access to the inside of the equipment.
B - Beep: warns the user when the equipment is switched on, when the
exercise starts or finishes or if the heart rate is high.
C - Main switch: turns the equipment’s power on and off.
Accessory equipment connected to the analog and digital interfaces must be
certified according to the respective IEC standards (i.e. IEC 60950 for data
processing equipment and IEC 60601-1 for medical equipment). Furthermore
all configurations shall comply with the system standard IEC 60601-1-1.
Everybody who connects additional equipment to the signal input part or
signal output part configures a medical system, and is therefore responsible
that the system, and is therefore responsible that the system complies with
the requirements of IEC 60601-1-1. If in doubt, consult the technical services
department or your local representative.
1.2 Description of the equipment
02380005
02258006
A
C
02142022
0SM00198AA_Bike Forma_01_UK.p65 01/07/2003, 17.4119
To Next Page
Loading...
