Technogym Bike Forma - Programming Personal Profiles

71
3.7.3 Programming personal profiles
When the key is pressed you are prompted to select a profile for the
workout.
select profile (1-6)
Press number keys 3 6 9 simultaneously to access personal profiles
management.
profile (01-09) = 03
Type in the number of the profile to be saved with the number keys, then
press ENTER to confirm. If the number entered corresponds to a previously
stored profile, this profile will shown in the goal dial display; if you proceed at
this point, the previously stored profile will be overwritten.
press 1 for power, 2 for CPR (1-2) = 2
Press number key 1 to program a constant power profile or number key 2 to
program a constant heart rate profile.
select goal: TIME or DISTANCE
Press the key for the selected GOAL.
Proceed with the programming of the individual steps: for each step you have
to enter different parameters, depending on the type of profile selected.
3.7 Profile workout
0SM00198AA_Bike Forma_03_UK.p65 01/07/2003, 17.4271