Technogym Bike Forma - Easily Solved Problems

31
1.5 Easily solved problems
Below is a list of problems that may arise during normal use of the equipment.
If the described remedies do not solve the problem, contact the Technical
Support Service.
Problem Cause Remedy
Equipment
doesn’t switch on
Mains power failure.
Power supply cable
damaged.
Power supply cable
installation problems.
Burnt-out fuses.
The control panel connector
has been accidentally
disconnected.
Check the power supply at
the wall socket used by
the equipment by plugging
in an appliance that
definitely works.
Contact the Technogym
Technical Support Service.
Check the connection.
To replace a burnt-out fuse
with a spare (3.15 A (F)),
contact the Technogym
Technical Support Service.
Contact the Technogym
Technical Support Service.
1.5 Easily solved problems
0SM00198AA_Bike Forma_01_UK.p65 01/07/2003, 17.4131