Techpro NVR-ELT4 - Information; Log; Version

288
Parameter
Function
setup.
Parity
Default setup is none. Please set according to the speed dome dial
switch setup.
5.9 Information
5.9.1 Version
The version interface is shown as in Figure 5-104.
Here you can view record channel, alarm input/output information, software version, release date and etc.
Please note the following information is for reference only.
Figure 5-104
5.9.2 Log
Here you can view system log. See Figure 5-105.
Figure 5-105
Please refer to the following sheet for log parameter information.