Instruction manual ITEM TE550 S.p.A.
66/92
CONTROL MODE* ALL
CURR. MIN 0.5 - 90.0 kA
CURR. MAX 0.5 - 90.0 kA
ANGLE MIN 005°-180°
ANGLE MAX 005°-180°
NOTES FOR THE BUTT WELDING WORKING MODE ONLY:
When the BUTT WELD MODE is set to ON, the seam welding (SEAM WELD MODE)
and high speed welding (SER. SPOT MODE) functions are disabled. Should one
activate them, this will make a programming error be displayed.
To Next Page
Loading...
