TECNA TE700 - Page 125

TECNA S.p.A. ITEM TE700 Instruction Manual
125/128
MESSAGE N° CAUSE REMEDY
DISPLACEMENT
LIMIT LOW
211
The control unit counts some faulty
spots, the last of which has been
carried out with a current value lower
than the min. set limit.
Reset the error as
specified.
DISPLACEMENT
LIMIT HIGH
212
The control unit counts some faulty
spots, the last of which has been
carried out with a current value lower
than the min. set limit.
Reset the error as
specified.
RESISTANCE
LIMIT LOW
213
The control unit counts some faulty
spots, the last of which has been
carried out with a current value lower
than the min. set limit.
Reset the error as
specified.
RESISTANCE
LIMIT HIGH
214
The control unit counts some faulty
spots, the last of which has been
carried out with a current value lower
than the min. set limit.
Reset the error as
specified.