P2002 Sierra
SECTION B
MAINTEN ANC E MAN UAL
pag.
B-22
2
st
Edition, April 22
th
, 2008
INSPECTION & SERVICING
N
ATURE OF INSPECTIONS
INSPECTION
INTERVALS
(
HR
)
100
Special
I
NOSE GEAR
1
Inspect support truss for gear strut and attachment hinges
2
Check proper movement of steering levers and pushrods
3
Check integrity and play of strut-to-fork hinge attachment 600
4
Check shock hinge attachments 600
5
Check shock for general condition and state of rubber disks
6
Inspect wheel for condition and fastening
7
Remove wheel, clean and grease wheel bearings 600(c)
8
Remove nose gear assy for general safety check and inspection 1200
9
Check integrity of fairing and fairing attachments
L
INSTRUMENT PANEL
1
General inspection of operation of flight and engine instruments
2
Check acoustic stall warning (if installed)
3
Check compass alignment 48
months
4
Check calibration of airspeed indicator and altimeter 1200
5
Check operation of avionic instrumentation (if installed)
6
Check operation of switches and fuses/breakers
7
Check generator charge
(c) initially at 100 hours.
To Next Page
Loading...
