Tecnam P2002 Sierra - Removal of the Mlg Wheel Roller Berings (See Fig.c16)

2
st
Edition, April 22
th
, 2008
P2002 Sierra
MAINTEN ANC E MAN UAL
SECTION C
AIRFRAME
pag.
C
-
19
6.2. REMOVAL OF THE MLG WHEEL ROLLER BERINGS (SEE FIG.C16)
Removal of a wheel bearing becomes necessary when excessive friction occurs
during wheel motion. Procedure is as follows:
A. Pull out the wheel (1) from the axle (3) by unscrewing the nut (2).
B. Remove bushing (4) and the plates (5)
C. Remove the roller bearing (6).
Clean the bearings accurately using appropriate solvent and wipe wheel rim
side. Grease using FIAT ZETA2.
F IGURE C-16 R EMOVAL OF THE MLG WHEEL ROLLER BEARINGS
6
3
5
1
4
5
6
2