!
2. Fabric or skin deterioration
3. Distortion
4. Evidence of failure
5. Insecurity of attachment
!
3.12.7 Empennage assembly
Inspect all components and systems for:
1. General condition
2. Fabric or skin deterioration
3. Distortion
4. Evidence of failure
5. Insecure attachment
6. Improper component installation
7. Improper component operation.
!
3.12.8 Propeller group
Check propeller assembly for:
1. Cracks
2. Nicks
3. Binds
4. Bolts for improper torque and lack of safetying
!
3.12.9 Radio group
1. Check radio and electronic equipment for improper installation and insecure mounting
2. Check wiring and conduits for improper routing, insecure mounting, and obvious defects
3. Check bonding and shielding for improper installation and poor condition
4. Check antenna including trailing antenna for poor condition, insecure mounting, and improper operation
!
3.12.10 Optional equipment
Check all optional equipment for proper operation
!
3.12.11 ELT
Remove and inspect the installed for proper operation of the “G” switch and calendar date currency of the batteries installed
in accordance with FAA Advisory Circular 91-44 current revision.
To Next Page
Loading...
