12
1-4-3 Notice for install motor
1. Please using oil seal motor to avoid the oil from reduction gear flowing into the motor through the motor shaft.
2. The cable need to be kept dry.
3. Please fixing the wiring cable certainly, to avoid the cable ablating or breaking.
4. The extending length of the shaft shall be sufficient, otherwise that will cause vibration of the motor.
Wrong Example Correct Example
Brake
Encoder
5. Please do not press the motor too hard when installation or separate from coupling. Otherwise the shaft and encoder
will be damaged.
Attention:
Brake
Encoder
To Next Page
Loading...
Need help?
General
