Chapter 3 Program Tools 31
Setting telephone number (GSM module SMS function)：
Build-in 20 HMI (H01~H14) can be set telephone number for SMS alarm. When HMI which set telephone is
enabled, SG2 save text information. Extension GSM module send this HMI text to telephone after reading this HMI
text.
Stop display Run display
Line1 set telephone number (shown as ).
Only set by dialog and max 15 number
characters.
Line2~line4 set text information (show as
), include preset value and current value
of function block, coil status (shown as )
and ASCII characters (shown as ).
Example:
1, SG2 saved H01 display information (M01
status and A01 value) when M01 is enabled
rising edge.
2, Extension GSM module send SMS to
telephone (H01 line1 number) after reading
messa
To Next Page
Loading...
