12
LISTEN TO STATIONS IN THE MEMORY
Method 1: Manual memory search
1. Short press the [SCAN MODE]
button with a "B" sound.
2. Rotate the [TUNING] knob for
those stations in the memory.
Method 2: Auto scan memory
1. Short press the [SCAN MODE]
button with a "B" sound .
2. Long press the [SCAN MODE]
button with a "B" sound to
activate the auto scan memory
function. It will search all the
stations within the memory,
and stop on each station for 3
seconds.
3. To stop auto search memory, simply press any button,
except [DELETE] button.
Note: If radio station has been searched & stopped for 3
seconds, Pressing [DELETE] button will delete the stored
radio station in current memory.
PRESET
SLEEP
Timer
17
In case of alarm being activated during your listening of the
radio, it will switch to the radio station which was set for
alarm function.
Note: Please check the volume is at the right level after
alarm is set.
View Memory mode
SLEEP
Timer
flashing
Auto-scan memory with
pre-listening
Method 3: Direct key in the station address number
1. Short press the [SCAN MODE] button with a "B" sound.
2. Use the numeric keypad to key in the memory number
in 3 digits. For example, if the desired radio station is in
memory number 006, just press 0, 0, 6, and it will go to
memory 006.
NOTE: When " - - - - " appeared in the display with a "B"
sound after you key in a number of the memory, means
there is nothing stored.
Set the alarm by buzzer
1. When the alarm is activated,
"BB" sound will continuously
alarmed. It will turn off
automatically according to
your setting.
2. If the alarm is activated, and
you are listening to the radio;
this radio will automatically
turn off, and activate the
alarm (only "BB" sound will
come out).
Snooze
After alarm was activated with buzzer or radio broadcasting,
press & release [LIGHT / SNOOZE] with a "B" sound. Then
the radio would be turned off temporary, it will start to alarm
again 5 minutes later.
TO TURN OFF THE ALARM
When the radio is turned on by the alarm function with radio,
you can short press [POWER] button to continue listening
radio afterwards.
Short press [POWER] again to turn off the radio.
When the radio is on by alarm functions with buzzer, you
can short press [POWER] button to turn off the alarm.
To activate the alarm by buzzer
Timer