flashing
14 15
turn on the radio permanently
SLEEP
Timer
SLEEP
Timer
SLEEP FUNCTION
CLOCK SETTING
The factory has set the clock to function as a 24-hour format
clock. If you prefer a 12 hour, AM/PM clock format, see the
selection titled Changing the clock format.
Method 1:
1. Long press [TIME] button with a "B" sound until you see
the "hour" flashing. Rotate the [TUNING] knob to adjust
the correct "hour".
2. Short press [TIME] button again with a "BB" sound, the
"minute" flashing. Rotate the [TUNING] knob to adjust
"minute".
3. Short press [TIME] button with a long "B- -" sound to
confirm your time setting.
Method 2:
1. Long press [TIME] button with a "B" sound until you see
the "hour" flashing.
2. Enter "hour" and "minute" with numbers directly by
pressing numeric keys. (For example, 14:50pm, just
enter 1 4 5 0)
Delete all memories
Method 3: To delete all memories
1. Short press the [SCAN MODE]
button with a "B" sound.
2. Long press [DELETE] button for
3 seconds or longer until a "BB"
sound to be heard.
3. Press & release [DELETE]
button to confirm deletion with
a long "B--" sound followed .
All the stored radio stations in
that band were deleted from
memory.
Note: If " " is flashing more than 3 seconds without
confirmation, it will exit the delete function automatically.
With sleep function, you can adjust the length of time for
the radio to turn off automatically. The default setting for
the auto-turn off time is 30 minutes since radio being
turned on. You could change it in accordance with your
requirements.
Long press the [POWER]
button with a long "B- -"
sound, rotate the [TUNING]
knob to select time from
1 ~ 120 minutes for sleep
timer within 3 seconds.
(select " " to turn on the
radio permanently).
Note: If [TIME] button not to be pressed again within 3
seconds, it will auto confirm the present display time and
following a long "B--" sound.
To Previous Page
Loading...
