29
SPECIFICATIONS
PL-310
Functional Block Diagram
PL-310 is using DSP si4734 Microchips (from Silicon Labs in
USA) to digitalize the analog AM/FM broadcasting signal base
on the modern software technology and radio principles. It can
highly improve on radio's sensitivity, selectivity, S/N ratio and
anti-interference.
AMPLIFIERCONTROLLER
CONTROL
INTERFACE
SW LPF
FM ANT
MW/LW
ANT
PL-310
Functional Block Diagram
1. Frequency range
FM 87~108 MHz
Russia 64~108MHz
Japan 76~108 MHz
Eu, USA 87.5~108 MHz
MW 522~1620 (USA 520~1710) kHz
LW 153~513 kHz
SW 2300~21950 kHz
2. Sensitivity
F M (S/N=30dB) Less than 2μV
MW (S/N=26dB) Less than 1mV/m
LW (S/N=26dB) Less than 10mV/m
SW (S/N=26dB) Less than 20μV
3.Selectivity
F M ＞60 dB
MW ＞60 dB
LW ＞60 dB
MW ＞60 dB
4. FM Stereo crosstalk Less than 35 dB
5. Memory 500
6. Output 350 mW
7. Power UM3 or AA X 3
USB 5V DC
8. Speaker 57mm, 500mW/16 Ohm
9. Earphone Jack 3.5mm, 8~32 Ohm, Stereo type
10. Dimensions Approx. 141(W) X 87(H) X 30(D) mm
11. Weight 187g (Batteries not included)
Ö
Ö
To Next Page
Loading...
