Tecsun PL-310ET - Listening to Stored Stations; Manual Memory Tuning; Auto Browse Memory; Direct Key in Memory Address

11
PL-310ET
METHOD 1: MANUAL MEMORY TUNING
Press the [VM/VF] button and
“P ESET ” will appear on screen
to enter memory mode, then
rotate the [TUNING] knob to
tune into the stored station
one by one.
METHOD 2: AUTO BROWSE MEMORY
1.Press the [VM/VF] button and
“P ESET ” will appear on screen
to enter memory mode.
2.Press & hold the [VM] button
until “P ESET ” flashing to auto
scan from one memory to
another, staying on each
station for about 5 seconds.
3.To stop auto search memory,
simply press the [VM/VF]
button.
R
R
R
LISTENING TO STORED STATIONS
SLEEP
Timer
Memory address
address state
SLEEP
Timer
flashing
Auto browse preset station
METHOD 3: DIRECT KEY IN MEMORY ADDRESS
1. Press the [VM] button to enter the memory mode.
2. Press the numeric keys [0] - [9] to enter the memory
address directly, and then press the button to
confirm.
Note: If the display shows “ - - - - ”symbol after entering
the number, it means the entered memory address
does not exist.