HOW TO SET THE ALARM BY RADIO
First preset the alarm station following below steps:
1. Turn on the radio, then tune into your favorite station for
alarm by radio and adjust your desired alarm volume
level.
2. Press the [M] button with “PERSET ” flashing,
3. Press the [ALARM] button immediately and notice “ ”
shows on the display to confirm the preset alarm station.
Then set the alarm time:
1. Press & hold the [ALARM] button until hours flashing in
the upper right corner, then rotate the [TUNING] knob to
adjust the hours.
2. Press the [ALARM] button, then rotate the [TUNING]
knob to adjust the minute while minutes flashing.
3. Press the [ALARM] button again
and notice “30” shows on display,
then rotate the [TUNING] knob to
select 1 ~ 90 minutes to set the
auto alarm off timer.
4. Press the [ALARM] button again
to confirm.
14
PL-310ET
WORKING WITH ALARM
It is recommended to set the alarm by buzzer if you are not
familiar with the local radio frequency and air time.
HOW TO SET THE ALARM BY BUZZER
1. Press & hold the [ALARM] button until hours flashing in
the upper right corner, then rotate the [TUNING] knob to
adjust the hour.
2. Press the [ALARM] button, then rotate the [TUNING]
knob to adjust the minute while minutes flashing.
3. Press the [ALARM] button again to confirm the setting.
※ If the [ALARM] button has not been pressed again
within 3 seconds, the unit will automatically confirm
the alarm setting.
Timer
Auto sleep timer
To Next Page
Loading...
Need help?
General
