7
PL-310ET
Tips:
FM station: When you are in a different city or country, you
should perform the ETM function again in stead of using
ATS function, because this will not delete any of the
stations already stored within the memory.
MW station: It is recommendable to perform the ETM
function during night time, because there are usually many
stations starting broadcasting at night.
SW station: It is recommendable to perform the ETM
function in the morning, afternoon as well as night time,
because the transmitting signal of SW is very unstable and
usually there are more stations that start broadcasting in
the late afternoon.
FAST/SLOW tuning is shown in the chart below for each band.
0.01 MHz
1kHz
1 kHz
1 kHz
0.1 MHz
9 /10kHz
9 kHz
5 kHz
FM
MW
LW
SW
step
band
turning step
Slow tuning mode
Fast tuning mode
turning step
METHOD 2: MANUAL TUNING
Frequency searching: Press the [VM/VF] button to switch
into frequency mode, and then rotate the [TUNING] knob to
select your desired station.
Memory searching: Press the [VM/VF] button and “VM”
will appear on screen to enter memory mode, and then
rotate the [TUNING] knob to select those stored stations.
To Next Page
Loading...
Need help?
General
