METHOD 3: AUTO BROWSE STATIONS
1.Turn on the radio and press the
[VM/VF] button to switch into
frequency mode.
2.Press & hold the [VM/VF] button
until [ ] advancing to scan
from one station to another,
staying on each station for about
5 seconds.
3.To stop the auto browse function,
simply press the [VM/VF] button.
SLEEP
Timer
8
PL-310ET
Note:
While operating the “Auto-browse Station” function, you can
press the [M] button anytime to store the station into
memory, and the radio will keep on auto browsing the next
available station.
Auto browse station
advancing
METHOD 4: DIRECT KEYPAD ENTRY
To search for a frequency, turn on the radio and press the
[VF] button to switch into frequency mode, press the
numeric keys [0] - [9] to enter the station frequency directly.
To search for those stored stations, press the [ ]
button to switch into memory mode, then press the numeric
keys [0] - [9] to enter the preset memory number directly.
Notes:
1. Ignore the decimal point for FM band when inputting the
frequency numbers.
For example, FM 89.3 MHz, just enter 8 9 3.
2. If the entered frequency is not within the covering area,
the display would display “Err” (error) symbol.
VM/VF
To Next Page
Loading...
