Tecsun PL-310ET User Manual

12
PL-310ET
Press the [VM/VF] button, then you will see the “Memory
address” and “VM” flashing on the upper right corner of the
display to enter the memory mode. Then follow one of the
below methods to delete those unwanted stations:
METHOD 1. DELETING A SINGLE MEMORY MANUALLY
Rotate the [TUNING] knob to
select the memory that you want
to delete, press & hold the
[DELETE] button until “dEL” and
“memory address” flashing; then
immediately press the [DELETE]
button to remove the unwanted
memory address.
METHOD 2: SEMI-AUTO DELETE MEMORY
Press and hold the [VM/VF]
button until “PRESET ” flashing to
auto browse those stored stations,
press the [DELETE] button at
anytime to direct delete the
unwanted station; the radio will
keep on auto browsing the next
available station until you press
any other button to stop this
function.
METHOD 3: MANUAL DELETES
ALL MEMORY WITHIN THE BAND
Press & hold the [DELETE] button
for 3 seconds and notices “ALL”
appears on the upper right corner
of the display, then press the
[DELETE] button to delete all
memory within the selected band.
DELETE MEMORY
flashing
Delete a single station
Delete memory
SLEEP
Timer
SLEEP
Timer
flashing
SLEEP
Timer

Tecsun PL-310ET Specifications

General

Brand	Tecsun
Model	PL-310ET
Category	Receiver
Language	English