Tecsun PL-310ET - Page 24

22
PL-310ET
QUESTIONS ANSWERS SOLUTIONS
-Did not set the
proper radio station
for the alarm
-Or there are no
broadcasting at
that radio station
-Or you have
travelled to other
city where does
not have a radio
station for your
preset frequency.
When the alarm
activated (alarm
by radio), there is
only noise with
the broadcast
-Preset your alarm
station properly
(see the above
setting)
-Make sure it has
radio broadcast in
your location.
-Or set the alarm by
buzzer.
radio malfunction
This may be
caused by
interference, and
the computer
microchip does not
function properly.
Remove the battery,
then you can reload.
If it is still not able to
work, please contact
your nearest dealer
for customer service.